DPA360A

Analog Input

3 x XLR electronically balanced

Analog Output

6 x XLR electronically balanced

Minimun Load

150 ohm

THD+N

0.001% at 1kHz 0dBu

S/N

>110dBA

Frequency Response

20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz

AD & DA Converters

24bit - 96kHz

DSP Engine

MARANI® DSP 

DSP Resolution

24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data 

Parametric Equalization

18 PEQ filters per input + 3 ALL PASS; 7 filters per output 

Input Gain

From -18dB to +12dB by 0.1dBu resolution steps 

Output Gain

From -18dB to +12dB by 0.1dBu resolution steps

Filter Type

Bell, Shelving, HP/LP, All Pass, Band Pass, Notch Filter

Filter Gain

From -15dBu up to +15dBu by 0.5dBu resolution steps

Center Frequency

from 20Hz up to 20kHz with 1Hz resolution steps

Filter Q/BW

Bell Type: Q from 0.4 up to 128 in 100 steps
Shelv/Hp/LP Type: Q from 0.1 up to 5.1 in 100 steps
BandPass/Notch Type: Q from 4 up to 104 in 100 steps 

Crossover Section HPF/LPF

Butterworth 6/12/18/24dB per octave
Bessel 12/24dB per octave
Linkwitz-Riley 12/24/36/48dB per octave

Internal Noise Generator

White/Pink Noise; Level from -40dBu to 0dBu

Input All Pass

Selectable as bypass, 1st and 2nd order

Input Noise Gate

Threshold from -80dBu up to -50dBu
Attack time from 1ms up to 1000ms; Release time from 10ms up to 1000ms

Input RMS Compressor

Threshold from 20dBu up to -10dBu
Ratio: 2:1~32:1; Knee: 0~100%;
Makeup from -12dBu to +12dBu
Attack time from 5ms up to 200ms; Release time from 0.1sec up to 3sec 

Output Peak Limiter

Threshold from 20dBu to -10dBu
Attack time from 1ms up to 900ms; Release time from 0.1sec up to 5sec

Headroom on internal overflow Processes

12dB

Routing

Full matrix mixing mode

Delay

310 ms 10.4us increment/decrement steps per input, 270ms 10.4us increment/decrement steps per output

Ground Noise

-90 dBu

Device Presets

32 User Presets

Front Panel

2×24 character LCD display with green LED backlight
7-LED meter per input channel -25dBu to +15dBu, clip and limiter mode
7-LED meter per output channel -15dBu to +15dBu, clip and limiter mode
Blue LED (Edit) per channel
Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel

Rear Panel

3 x XLR female connector (Input)
6 x XLR male connector (Output)
1 x XLR female connector for RS485 (Input)
1 x XLR male connector for RS485 (Output)
USB type A connector
2 x Ground-lift toggle switch
IEC C13 16A connector
Power on/off switch

Main AC

90-240VAC (50/60Hz) – 40W

Dimensions

19”x 1.75”x 9” (483x44x229mm) 1RU

Weight, Net / Shipping

7.71 lbs (3.5 Kg) / 8.82 lb (4 Kg)